DTA Series Batteries are maintenance free sealed lead-acid batteries composed of flat plates, high porosity AGM separator and ABS container. The cycle life is longer rather than conventional flooded batteries because of better vibration and impact resistant. Better deep discharge performance and quick recharge are also the key features of these batteries.

General Features

1.        Maintenance-free sealed construction, spill proof——safe and reliable.

2.        Strength-enhanced ABS container and compressed plate groups——better vibration and impact resistant.

3.        Special Lead-Calcium grid design——better corrosion resistant, deep discharge performance, higher capacity and longer cycle life.

4.        High porosity AGM separator——high oxygen recombination rate to ensure minimum gassing.

5.        Brass insert terminals——superior conductivity and high rate discharge performance.

6.        Low internal resistance——high charge acceptance and quick recharge.

7.        Low self discharge——longer shelf life than conventional batteries

Typical Applications

1.        Golf cart.

2.        Electric sightseeing car.

3.        Electric vehicle.

4.        Electric scooter.

5.        Marine.

6.        Solar.

7.        Electric forklift.

8.        Portable Medical device.

9.        Scraper.

10.     Wheelchair.

DGF Series batteries are flooded tubular battery, rechargeable lead-acid batteries which in contrast to conventional systems, retain positive plates as tubular structure.

General Features

1.        Longer service life.

2.        Higher number of cycles.

3.        Reliable pillar sealing construction, absolute no pillar corrosion.

4.        Against short circuit design with the highest possibility to prevent any short circuit.

5.        Flexible option for automatic refilling system and air circulation system.

6.        Nonwoven protective gauntlet, better elastic, less pore size, less electrical resistance and higher air permeability.

7.        Flexible, fully isolated connector prevents any creeping current.

8.        Flip top plugs with special electrolyte level indication.

9.        Imported microporous catercorner separator with advanced quality provides higher porosity and lower electrical resistance.

10.     Containers and lids are made of polypropylene (PP). The impact resistance is very good.

11.     Patented terminal sealing construction fully prevents plate growth and electrolyte leakage.

Typical Applications

1.        Golf cart.

2.        Electric resort car.

3.        Marine.

4.        Electric utility vehicle.

5.        Electric scooter.

6.        Boat.

7.        Solar.

8.        Medical application.

9.        Electric forklift.

10.     RV.

11.     Scraper.

12.     Wheelchairs.

DTG Series batteries are valve regulated , flat plate rechargeable lead-acid batteries which in contrast to conventional systems, retain the electrolyte is gel. It is this robust gel technology which gives the battery its absolute freedom from maintenance. Insensitive to occasional deep discharge. Better performance in high temperature environment

General Features

1.        Special plate design, long cycle lifetime.

2.        Using special lead-calcium alloy to boost up the grid anti-corrosive performance and extend the battery using lifetime.

3.        Using special separator to boost up the battery performance inside.

4.        Reduce water losing rate and lower the possibility of thermal runaway. Better performance under critical ambient temperature condition.

5.        High gas recombined reaction efficiency.

6.        Little water losing, no electrolyte stratification phenomenon.

7.        Long storage time.

8.        Good deep discharge resilience performance.

9.        Using gas silicon dioxide, small granule degree, bigger than surface area.

Typical Applications

1.        Golf cart

2.        Electric resort car

3.        Marine

4.        Electric utility vehicle

5.        Electric scooter

6.        Boat

7.        Solar

8.        Medical application

9.        Electric forklift

10.     RV

11.     Scraper

12.     Wheelchairs

DGG Series batteries are valve regulated, rechargeable lead-acid batteries which, in contrast to conventional systems, retain the electrolyte is gel and also are using of tubular plates to increase cycle life by preventing of material shedding and pressing of PAM specially in discharged state.

General Features

Performance Advantages

1.        Longer service life.

2.        Higher number of cycles.

3.        Reliable pillar sealing construction, absolute no pillar corrosion.

4.        Against short circuit design with the highest possibility to prevent any short circuit.

Construction Features

1.        Nonwoven protective gauntlet, better elastic, less pore size, less electrical resistance and higher air permeability.

2.        Flexible, fully isolated connector prevents any creeping current.

3.        Flip top plugs with special electrolyte level indication.

4.        Imported microporous catercorner separator with advanced quality provides higher porosity and lower electrical resistance.

5.        Containers and lids are made of polypropylene (PP). The impact resistance is very good.

6.        Patented terminal sealing construction fully prevents plate growth and electrolyte leakage.

7.        Completely sealing throughout the batteries life.

8.        Low gassing thanks to antimony-free alloy and internal oxygen recombination.

9.        Minimum space required and room requirements are minimal e.g. no washing facilities needed, ventilation requirements are minimal.

10.     Easy to move and handle.

11.     Easy install using cable connectors with insulated terminal covers.

12.     Ready for immediate use without further commissioning work.

13.     Can be supplied as a standard vertical installation or by special request, for a horizontal installation.

14.     Very low self-discharge 50% of rated capacity in 2 years at 20 ambient temperature.

15.     High cyclic ability over 1000 cycles when discharged at 100%DOD at 20 .

16.     Deep discharge protected, a load can be connected to the battery for up to 4 weeks.

17.     No internal short circuits possible due to the gel structure.

18.     No acid stratification, so no equalizing charge necessary .

Typical Applications

1.        Golf cart.

2.        Electric resort car.

3.        Marine.

4.        Electric utility vehicle.

5.        Electric scooter.

6.        Boat.

7.        Solar.

8.        Medical application.

9.        Electric forklift.

10.     RV.

11.     Scraper.

12.     Wheelchairs.

DT Series batteries are a clean, reliable power source for golf, electric vehicle, floor machine, AWP, RV, marine, mobility, renewable energy and commercial truck applications.

General Features

1.        Higher capacity and higher energy density.

2.        Longer service life.

3.        Excellent deep cycle property.

4.        Private alloy and paste recipe for deep cycle application.

5.        Refilling plugs with special construction guarantee less water consumption.

6.        SiO2-PVC separator in nano grade.

7.        Advanced TTP welding and heat sealing technology.

8.        Terminals with high conductivity are very good at high current discharging.

9.        Containers and lids are impact resistant and made of polypropylene(PP).

10.     Wider operation temperature, safe and reliable.

Typical Applications

1.        Battery can be used as power for Golf Cart, Electrical car, Electric Sightseeing Car, toy Car, Mini-truck, The Transportation without Driver;

2.        Battery can be used as power source for industrial Mineral firms, Warehouse, dock, Station, Airport and etc.

GF Series batteries are a clean, reliable power source for golf, electric vehicle, floor machine, AWP, RV, marine, mobility, renewable energy and commercial truck applications.

General Features

1.        High capacity design, higher energy density.

2.        Excellent deep cycle property, longer service life.

3.        Private grid construction design and paste recipe, high charging acceptance ability.

4.        Private valve regulated seal construction, safe and reliable.

5.        Outstanding vibration-resistant, wide operation temperature.

6.        AGM separator, no fluid electrolyte, guarantees oxygen recombination inside the battery.

7.        High purity lead calcium alloy, maintenance free and less water losing.

8.        Lower self-discharge, better storage capability.

9.        Advanced inter partition (TTP) welding technology obtains shorter current transfer path so as to get lower electrical resistance.

10.     Strength-enhanced containers and lids are made of polypropylene (PP) to keep tight assembly of batteries.

11.     Adopt heat sealing technology to seal container and lid, absolutely no leakage.

12.     High strength terminals with high conductivity are very good at high current discharging.

13.     Strength-enhanced containers and lids are impact resistant and made of polypropylene (PP).

14.     Attached protective covers for terminals and removable carry handles are convenient for operation.